HMT-X900

  • Listed: June 7, 2016 1:30 pm
  • Expires: This ad has expired
  • Mobile: +971505580663
  • Street: Dubai
  • Emirates: Dubai
  • Country: United Arab Emirates
  • Zip/Postal Code: 4563
  • Phone: +971505580663
  • Website: http://www.gold-ftg.com

Description

A lot of years only to find the desired elements will feed Radio Frequency (RF) capable of transmitting signals,this small but powerful HMT-X900 makers have been experimenting with various devices to improve the time was spent.Signal stability within the precision of HMT-X900 is manufactured with technologically advanced micro-chip. Signal is routed through a reasonable distance with a range of soil.Transmitted signal is induced in the soil during the course of a 360-degree direction.This induced signal begins to appear with the onset of targets.
MAGNETIC FIELDS AND INTERVENTION TRIAL
1.Piece of iron is not a signal from the signal of the soil is reduced by a stronger magnetic field. Thus, iron objects cannot be found by the bar. (Illustration 1)
2.A signal is received from a piece of iron rod was found by L because he is stronger than the earth’s magnetic field.
•Carefully read the user manual and follow all the details.
•Avoid connecting directly to a 110/220 volt outlet! This will damage the unit! Use only original batteries and chargers.
•In the user does not have any parts that might benefit from it. Any effort to be spent to open the safe will void the warranty.
•Flying “L” bar below the eyes can damage the eyes, carefully hold them.
•See whether L rods and immediately if dirty clean with steel wool for.
•Do not operate the unit on a rainy day, the unit is not waterproof and can work unfinished.
•Do not store the unit under direct sunlight or do not operate above 35 degrees.
MODE SETTINGS MENU
HMT-X900 mode setting successfully sends an audible sound when pressed. Mode by entering the settings menu of the HMT-X900 translates programs in their memory. Gold 5.00kHz
1.Gold:4.9 to 5.1 kHz low-frequency spectrums between naturally attract gold mines. Jewelers 5.4 and 5.5 which showed significantly reduced propensity for pulling frequencies between 18 and 22 carat gold man-made objects that respond in the 5.2 and 5.3 kHz bars at different frequencies so multiple controls are recommended. If you double check the set HMT-X900 5.0KHz. Wait 5 minutes and scan again if you show him that the bar is a mine.
2.Silver:8.70khz
3.Bronze:11.30khz
4.Copper:11.70khz
5.Aluminum:7.00khz
6.Diamond:12.70khz
7.Lead:4.25khz
8.Iron:17.00khz
9.Water:10.00khz
10.Clearance: 70.00khz
For Promotion Price contact/whatApp on +971505580663 or email us at golddetector2016@gmail.com

Share with Friends

Mention that you found this ad on Bibango.com when you Call or Message.

No Tags

  

Listing ID: 2605756940e36a73

Report problem

Processing your request, Please wait....